Billing, ERP, communication and streaming software from Dhaka. Every day • 10:00 AM – 10:00 PM01347-536500 to 01347-536509info@sweetbilling.com

Cleaning Fiber Connectors: The Cheapest Fix in Your Network

Why dirty connectors cause weak ONU signal and intermittent faults, and how technicians should clean them.

By the Sweet Billing team Updated 3 min read Facebook WhatsApp

Dirt is the most common fault

A little dust on a connector end face can add several dB of loss or cause reflections.

Inspect, then clean

Use a fiber scope to look at the end face. Clean with a one-click cleaner or lint-free wipes and the right solvent.

Never touch the end face

Fingers leave oil that attracts dust.

Cap everything

Keep dust caps on unused ports and patch cords.

Re-measure

Check the ONU signal after cleaning to confirm the fix.

See it working

Open a live demo or talk to the Sweet Billing team about your setup.

More guides